This site uses cookies to ensure its correct operation. More


Vega LM-211 GNSS beacon is designed to determine its location using GLONASS/GPS signals, or using BLE tags in the absence of a GNSS signal, for example, in workshops, tunnels and other premises.
Device transfers data to monitoring servers using LoRaWAN® technology. This allows to significantly improve the energy efficiency of the device, and it also becomes possible to use it at sites without mobile communication coverage.
The case has magnetic fastenings for neodymium magnets, as well as lugs for fastening with clamps. The high degree of protection of the housing IP67 and the operating temperature range from -40 to +70 °C allow you to install the device in unheated rooms and outdoors.
Depending on the selected capacity of the built-in battery, there are two options for the device:
Vega LM-211 6400 mAh
Vega LM-211 12800 mAh
Both options have the same other characteristics and functionality.

Vega LM-211Vega LM-211Vega LM-211


  • Class A
  • Battery powered
  • Frequency plans: RU868, EU868, IN865, AS923, AU915, KR920, US915, KZ865 (depend on selected firmware)
  • Ability to set a custom frequency plan (EU868 based)
  • Undelivered packets are saved in modem memory (up to 240 entries)
  • Determination of the angle of inclination by the built-in accelerometer
  • Ability to determine an angle of deviation from the vertical
  • GLONASS/GPS module
  • Determination of coordinates by BLE tags (iBeacon, AltBeacon, Eddystone, Vega)
  • Determination of position above sea level
  • Determination of the fact of the start of movement
  • Temperature measurement
  • Determination of coordinates by GLONASS/GPS satellites
  • Binding coordinates determination to internal clock time
  • Data collection period - every 1, 5, 15, 30 minutes, 1, 6, 12, 24 hours
  • Communication period - every 5, 15, 30 minutes, 1, 6, 12, 24 hours
  • ADR support (Adaptive Data Rate)
  • Sending of confirmed packets (configurable)
  • OTAA or ABP activation (configurable)
  • Two operating sub-modes «Movement» and «Static»
  • Extra communication in case of accelerometer actuation
  • Charge measuring of the built-in battery, %
  • Alignment via USB interface with Vega LoRaWAN Configurator application
To compare